Elmo Motors, wash motors, washer motors, extract motors, extractor motors, Unimac, Uniwash, Speed Queen, Unimat, Huebsch, Ipso, washer and dryer parts.

Guess what? We've been very busy lately lowering our already low prices even more..... we are talking savings of up to 85% off of list price(almost all of our parts are at least 50% below list price) We are also in the process of adding a 'bunch more' parts on a daily basis (so if we don't have what you are looking for today, be sure to check back tomorrow...)

PLEASE SCROLL ALL THE WAY DOWN THIS PAGE

Where Would You Like to Go?

(Clicking on one of the blue links below takes you into the store)

UNIMAC CAR WASH PARTS

WASHER PARTS

Belts, Hoses, Door Gaskets, Motors, Contactors, Capacitors, Main Bearings, Drain Valves, Water Valves and Rebuild Kits, Door Solenoids, Level Switches, Key Pads, Spray Rinse Hoses, and much more.

Please note: Unimac/Uniwash, Huebsch, Speed Queen (not the ones made in Spain) are all manufactured by Alliance (The Unimac Factory). These are all the same machines just with different labels.

Speed Queen models would be SC, SX, SF, Unimac/Uniwash models would be UC,UF, & UX, Huebsch models would be HC & HX (there isn't an HF)

The UW models are exclusive to the Unimac Label.

DRYER PARTS

As with the washers; the dryers are all made by Unimac/Alliance as well. Speed Queen is the same as Huebsch and Unimac All the parts are the same.

WASHER MOTORS

Before ordering motors please read our policy page. Also, unless you have the part#, please call the factory with your machines model and serial number so as to be sure of the correct motor number. If you have a Wascomat motor or other European made washer, please read the information further down this page.

Universal Hays Valve applications

Universal Parker Valve applications

Alliance Factory # (920) 748-3125

(This number is for SpeedQueen, Unimac, Uniwash, Industrial Maytag, Ipso, and Huebsch parts and part numbers.)

These are BRAND NEW MOTORS not rebuilds.

Please note: The motors listed below are the only Elmo motors which we have available, we cannot get any other Elmo motors at this time.

All motors are in stock - Unless otherwise indicated with an 'out-of-stock' note below.

To order - click on the motor part number

PLEASE READ THIS FIRST

Motors for Wascomat washers and some other European machines have a Metric shaft, most (but not all) of the ones that we sell have U.S. Standard shafts (i.e. 5/8" 7/8" etc. If the motor number begins with F220--- it has a U.S. sized shaft) you can still use them but you will need to go to your local machine shop or industrial supply store (Grainger is a good one or www.motionindustries.com) and purchase a new motor pulley with the same outside dimensions as your old one, or you can take your old pulley down to your local machine shop and have them machine it to the correct dimensions (sure it takes a little bit of extra effort but look at all the money you will be saving on the motor....) The way that you order European motors is by using the "C" number on the Elmo motor tag (i.e. CVE132E/2-18-R-2T).

The other thing you will need to check is: some of the older 'Single Phase' machines used a mechanical motor start-switch' (or 'Centrifugal Switch') instead of the newer style 'Solid-State Start Switch' You can tell this by looking at the motor: The mechanical start-switch was mounted externally on the end of the motor shaft, directly opposite of the belt pulley (it's usually easier to see by removing the front panel on the washer - you will also see the additional wires going to that end of the motor).

If our motor number does not have a 'CS' after it (i.e. - CVE132H/2-18-R-2T-CS) it will require a solid state start switch. If your old motor has a mechanical centrifugal switch type, and the replacement motor that we sell does not have a 'CS' then it can be upgraded to a solid-state motor start switch, we will provide you with the wiring diagram to do this (however due to the complexity of it you will need to have it done by a qualified service person, this is also a requirement to activate the one-year warranty).

TESTING THE SOLID STATE START SWITCH

NOTE: THE PROCEDURE FOR TESTING THE SINPAC

SOLID STATE SWITCH IS FURTHER DOWN THIS PAGE.

More: Our motors come with a one year warranty, however, due to the temperamental nature of the 'single-phase' motors the warranty will only be activated if the capacitors, motor start-switch, and contactors are replaced/or tested by a qualified technician (verification via copy of invoice is required). We offer an exceptional package deal on these components.

Please type in your motor # in the Google search bar (for example: CV112C/2-18-2T do not use any spaces between letters or numbers and leave off any trailing numbers after the 2T or 3T) then click: 'Google Search' then click: 'cached' for results.

WWW norcalindustrial

The motors listed below are the only Elmo motors which we have available, we cannot get any other Elmo motors at this time.

All motors are brand new and in stock - Unless otherwise indicated with an 'out-of-stock' note below.

To get an estimate on shipping costs, click on the motor number, this will take you into the store, then click 'add to the basket', then click 'check-out' once you fill in the order info. and click 'submit' it will take you into the next page where you will have shipping cost options along with credit card info.

Please click on blue part # to order

F220396 CV112B/2-18-2T 208-240V 60Hz. 3 Ph. Elmo Motor (2 Speed Machine) Unimac UC18, Speed Queen SC18, Huebsch HC18, & Maytag AT18. List $779.00 Ours $388.00

227/00103/01 CV112B/2-18-3T 208-240V 60Hz. 3 Phase Elmo motor for Ipso WE73 THIS MOTOR HAS A METRIC SHAFT List $742.00 Ours $469.00

F220352 CV112C/2-18-2T 220-240V 50 Hz. 3 Phase Elmo Motor (2 Speed Machine) Unimac UC18, Speed Queen SC18, Huebsch HC18 & Maytag AT18. List $899.00 Ours $412.00

F220325 CV112C/2-18-2T 380-415V 50Hz. 3 Ph. Elmo Motor (2 Speed Machine) Unimac UC18, Huebsch HC18, Speed Queen SC18 & Maytag AT18. List $921.00 Ours $422.00

F220320 CV112C/2-18-2T 208-220V 60Hz.3 Ph. Elmo motor (2 speed Machine) F798742 For the Unimac UC18, Huebsch HC18, Speed Queen SC18, Maytag AT18. CV112C/2-18-2T List $786.00 Ours $457.00

F220387 CV112E/2-18-SD-2T 208-220V 3 Phase 60Hz. (2 Speed Elmo motor) For Unimac UC25,UC27, Huebsch HC25, HC27, Speed Queen SC25, SC27 and Maytag AT25 & AT27. List $904.00 Ours $451

F220388 CV112E/2-18-2T 380-415V 50Hz. 3 Ph. Elmo Motor 2 Speed Machines Unimac/Uniwash UC25, UC27, Huebsch HC25, HC27, Speed Queen SC25, SC27 & Maytag AT25, AT27. List $1088.00 Ours $472.00

F220234 CV114/4-2T 208-240V Var. Speed 3Ph. Elmo Motor Unimac/Uniwash UC50, Huebsch HC50, Speed Queen SC50 & Maytag AT50. (Inverter Driven Machines) List $904.00 Ours $512.00

F220414 CV132C/2-4-24-3T 208-240V 60Hz. 3Ph. Elmo Motor (For the 3 speed Machines) Unimac UC18, Huebsch HC18, Speed Queen SC18 & Maytag AT18. List $2766.00 Ours $1271.00

F220384 CV132D/2-18-2T 220-380V 50Hz. 3 Ph. Elmo Motor for the 2 Speed Unimac UC35, Huebsch HC35, Speed Queen SC35, & Maytag AT35. List $1240.00 Ours $579.00

F220326 CV132D/2-18-2T 380-415V 50Hz. 3 Ph. Elmo Motor (2 Speed machine) For Unimac UC35, Huebsch HC35, Speed Queen SC35 & Maytag AT35 & Uniwash UW35. List $987.00 Ours $512.00

228/00105/01 CV132D/2-18-2T 208-220V 60Hz. 3 Phase Elmo motor for Ipso WE165 THIS HAS A METRIC SHAFT. Ours $703.00

F220321 CV132D/2-18-2T 208V-240V 60Hz. 3 Ph. Elmo Motor #F798727 #F0220321-00 Unimac UC35, Huebsch HC35, Speed Queen SC35, Maytag AT35 & Uniwash UW35. 2 Speed Machines List $1451.00 Ours $464.00

F220354 CV132G/2-18-2 220-240V 50Hz. 3 Ph. Elmo Motor Unimac/Uniwash UC50, Huebsch HC50, Speed Queen SC50 & Maytag AT50. 2 Speed Machines. List $2015.00 Ours $726.00

F220327 CV132G/2-18-2T 380-415V 50Hz. 3Ph. 2 Speed Elmo motor Unimac/Uniwash UC50, Huebsch HC50, Speed Queen SC50 & Maytag AT50. List $1505.00 Ours $719.00

241/00003/00 CV132G/2-18-2T 208-220V 60Hz. 3 Phase Elmo Motor for Ipso WE234 List$1505.00 Ours $857.00 THIS MOTOR HAS A METRIC SHAFT

F220322 CV132G/2-18-2T 208-240V 60Hz. 3Ph. Elmo Motor F798728 F0220322-00 Unimac UC50, Speed Queen SC50, Huebsch HC50 & Maytag AT50. 2 Speed Machines. List $1225.00-$1715.00 Ours $757.00

F220401 CV132H+/2-4-20-3T 208-220V 60Hz. 3 Ph. Elmo Motor (3 Speed) For the Uniwash UW50P3, UW50PN3's List $2139.00 Ours $1256.00 Note: This motor is only available via light truck freight (3-4 days) - When ordering choose the UPS ground option only.

F220303 CV132H+/2-18-2T 380-415V 50Hz. 3 Ph. Elmo Motor for the Uniwash UW60 2 speed machines (non-inverter) List $1671.00 Ours $721.00

F220302 CV132H+/2-18-2T 208-220V 60Hz. 3 Ph. Elmo Motor F798756 For Uniwash UW60 2 Speed (non-inverter driven machines). List $1111.00 Ours $769.00

227/00104/00 CVE112C/2-18-R-2T 220-240V 60Hz. Single Ph. Elmo motor for Ipso WE73 THIS MOTOR HAS A METRIC SHAFT/ USES A SOLID STATE MOTOR START SWITCH List $1105.00 Ours $572.00

227/00105/00 CVE112C/2-18-R-2T 120V 60Hz. Single Phase Elmo Motor for Ipso WE73 THIS MOTOR HAS A METRIC SHAFT/ USES A SOLID STATE MOTOR START SWITCH List $1105.00 Ours $572.00

F220110 CVE112D/2-18-R-2T 120V Single Phase Elmo Motor (2 Speed Machine) Unimac UC18, Speed Queen SC18, Huebsch HC18 & Maytag AT18. List $967.00 Ours $372.00

F220124 CVE132D/2-18-R-2T 220-240V 60Hz. Single Phase Elmo Motor (2 Speed Machine) For Unimac UC25, UC27, Huebsch HC25, HC27, Speed Queen SC25, SC27, and Maytag AT25 & AT27. List $1351.00 Ours $732.00

F220117 CVE112E/2-18-R-2T 220-240V 50Hz. Single Phase Elmo Motor (2 Speed Machine) (replaced by F220130) For Unimac UC18, Huebsch HC18, Speed Queen SC18, & Maytag AT18. List $1213.00 Ours $512.00

227/00109/00 CVE112F/2-18-2T-CS 220-240V 60Hz. Single Ph. Elmo motor for Ipso WE95 THIS MOTOR HAS A METRIC SHAFT WITH A MECHANICAL CENTRIFUGAL SWITCH List $1371.00 Ours $721.00

F220111 CVE132F/2-18-R-2T 220V-240V 60Hz. Single Ph. Elmo Motor (2 speed Machine) F798725 For Unimac UC35 Huebsch HC35, Speed Queen SC35, Maytag AT35, & Uniwash UW35. Ours $678.00 Motor is currently out of stock

228/00106/00 CVE132F/2-18-R-2T-CS 220-240V 60Hz. Single Ph. Elmo motor for Ipso WE165 THIS MOTOR HAS A METRIC SHAFT WITH A MECHANICAL CENTRIFUGAL SWITCH List $1938.00 Ours $1107.00

170501 CVE132H/2-18-R-2T-CS-2588 208-240V 60 Hz. 1 Ph. Elmo Motor for Primus and Maytag THIS MOTOR HAS A METRIC SHAFT WITH A MECHANICAL CENTRIFUGAL SWITCH List $1819.00 Ours $939.00

F220120 CVE132K/2-18-R-2T 220V-240V Single Ph.60Hz. Elmo Motor F798731 F0220120-00 Unimac UC50, Huebsch HC50, Speed Queen SC50 & Maytag AT50. 2 Speed Machines. List $2316.00 Ours $1089.00

F220308 CF132C/G-2-4-R-3T 208-240V 60 Hz. 3 Ph. Extract Motor for Uniwash UW65 & UW85 List $1232.00 Ours $754.00

F220203 CF132C/G-12-3T 208-240V 60Hz. 3 Ph. Wash Motor for 3 speed Uniwash UW85PN machine. List $954.00 Ours $739.00 Note: This motor is only available via light truck freight (3-4 days) - When ordering choose the UPS ground option only.

F220412 CF132C/8-12-2T 208-240V 60Hz. 3 Ph. Wash Motor F798762 F798744 Unimac UC50, Huebsch HC50, Speed Queen SC50, Maytag AT50 & Uniwash UW50. List $2015.00 Ours $756.00 Note: This motor is only available via light truck freight (3-4 days) - When ordering choose the UPS ground option only.

F220410 CF132D/12-18-2T 208-240V 60 Hz. 3 Ph. Wash motor for 3 speed Unimac UC35, Speed Queen SC35, Huebsch HC35, Maytag AT35 & Uniwash UW 35. List $1535.00 Ours $742.00

F220314 CF132G/G-2-4-R-3T 208-240V 60 Hz. 3 Ph. Extract Motor for Uniwash UW125PN List $1577.00 Ours $1089.00 Note: This motor is only available via light truck freight (3-4 days) - When ordering choose the UPS ground option only.

F220315 CF132G/G-2-4-R-3T 380-415V 50 Hz. 3 Ph. Extract motor for the Uniwash UW125PN List $2334.00 Ours $1089.00 Note: This motor is only available via light truck freight (3-4 days) - When ordering choose the UPS ground option only.

F220306 CF132H+/G-12-18-2T 208-220V 60 Hz. 3 Ph. Wash Motor For Uniwash 50PN4 Machines (replaces the Century & Magnetek Motors) List $1615.00 Ours $1,104.00 Note: This motor is only available via light truck freight (3-4 days) - When ordering choose the UPS ground option only.

F220310 CF160G/12-18-2T 208-240V 60 Hz. 3 Ph. Wash Motor for Uniwash UW65PN & UW85PN 4 Speed machines. List $1980.00 Ours $1279.00 Note: This motor is only available via light truck freight (3-4 days) - When ordering choose the UPS ground option only.

F220312 CF160K/12-18-3T 208-240V 60 Hz. 3 Ph. Wash motor for Uniwash UW125PN List $3679.00 Ours $1727.00 Note: This motor is only available via light truck freight (3-4 days) - When ordering choose the UPS ground option only.

F220313 CF160K/12-18-3T 380-415V 50 Hz. 3 PH. Wash Motor for Uniwash UW125PN List $2637.00 Ours $1727.00 Note: This motor is only available via light truck freight (3-4 days) - When ordering choose the UPS ground option only.

F220427 QSF112B/2-R-2T 380-415V 50Hz. 3 Ph. Extract Motor (3 Speed Machine) Unimac UC50, Speed Queen SC50, Huebsch HC50 & Maytag AT50. List $954.00 Ours $572.00

F220304 QSF112B/2-4-R-3T 208-220V 60Hz. 3 Ph. Extract Motor (4 Speed Machine) For the Uniwash UW50PN4 Machines List $979.00 Ours $760.00

F220214 195-390V 50,60Hz 5Hp 4-Pole. Motor for Unimac/Uniwash UW50PV, UW60PV60, UF50PV, UF60PV & Speed Queen SF50PV & SF60PV. Inverter driven machines. List $949.00 Ours $587.00

F220215 195-390V 50/60Hz. 3 Hp. 4-pole. Motor for Unimac/Uniwash UW35PV, UF35PV, Speed Queen SF35PV. inverter Driven Machines List $934.00 Ours $361.00

F220216 195-390V 50/60Hz. 7.5Hp 4 Pole. Motor for Unimac/Uniwash UW85PV, UW100PV Inverter driven machines List $1710.00 Ours $744.00 Note: This motor is only available via light truck freight (3-4 days) - When ordering choose the UPS ground option only.

F220217 195-390V 50/60 Hz. 7.5 Hp. 6-Pole. Motor for Unimac/Uniwash UF85PV & Speed Queen SF85PV Inverter driven machines. List $3245.00 Ours $1175.00 Note: This motor is only available via light truck freight (3-4 days) - When ordering choose the UPS ground option only.

F220218 195-390V 50/60 Hz. 10 Hp. 4-Pole. Motor for the Uniwash/Unimac UW125PVQ & Speed Queen SI 135PVQ Inverter driven machine. List $2497.00 Ours $1090.00 Note: This motor is only available via light truck freight (3-4 days) - When ordering choose the UPS ground option only.

220-990 Centrifugal Switch (Rotating Part) $18.87 Old Style centrifugal switch for the elmo motor.

220-989 Centrifugal Switch (Stationary Part) $17.82 Old Style centrifugal switch for the elmo motor.

If you like our prices here, then be sure to check out our affiliate site -

GLOBAL INDUSTRIAL

They too have exceptional prices - everything from:

Storage Equipment/Pallet Jacks/Office Furniture/Generators/Lift Trucks/Hoists/Cranes/Tool Carts/Racks/Bins/Safety Equipment/Maintenance Supplies/Janitorial Supplies/Fans/Air Conditioners and much, much more.